Buzz, Squeak & Rattles (BSR) may be caused by any one or more of the following and may be corrected as indicated:Loose fasteners should be tightened to specifications.Damaged or missing clips should be replaced.Damaged trim panels should be replaced.Incorrectly installed trim panels should be reinstalled properly.Many BSR complaints such as loose trim, can be serviced using the Mopar® Parts BSR Noise Reduction Kit. This kit contains various tapes including foam, flock and anti-squeak used to eliminate noises caused by metal, plastic and vinyl components. Long life lubricants and greases can also be used on a variety of components. Refer to the Buzz, Squeak & Rattle Kit table for material contents and usage.ITEMFEATURESAPPLICATIONSSERVICE TEMPItch And Squeak TapeAn abrasion resistant material thin enough to conform to most irregular surfaces. Stops most itches and squeaks.Between metal and metal, metal and plastic, metal and vinyl, vinyl and plastic. Interior.Examples: Trim panels and bezels.-40° to 107° C(-40° to 225° F)Black Nylon FlockNylon Flock with an aggressive acrylic adhesive. Provides for cushioning and compression fit, also isolates components. Water-resistant.Between metal and metal, metal and plastic, vinyl and plastic.Examples: Pull cups, bezels, clips, ducts, top cover to glass, cowl panel.-40° to 82° C(-40° to 180° F)High Density Urethane FoamTear resistant, highly resilient and durable.Between metal and metal, metal and plastic. Water-resistant.Examples: I/P, heavy metal rattles, isolating brackets.-40° to 82° C(-40° to 180° F)Open Cell Foam TapeSoft foam conforms to irregular surfaces.Wire harness and connector wrap.Examples: Seals, gasket, wiring, heat ducts.-40° to 82° C(-40° to 180° F)Closed Cell Low Density Foam TapeSoft, conformable. Water-resistant.Wherever bulk is needed. Prevents closing flutters and rattles when applied to door watershield.Examples: Door, I/P.-40° to 82° C(-40° to 180° F)NYE® Grease 880Long life.Suspensions.Examples: Strut bushings, sway bars.-40° to 200° C(-40° to 390° F)Krytox® OilLong life. Will not dry out or harm plastics or rubber.When access is not possible, oil will migrate to condition. Vinyl, rubber, plastic, metal.Examples: Convertible top bushings, pull cups trim panel inserts.-34° to 205° C(-30° to 400° F)Krytox® GreaseLong life. Will not dry out or harm plastics or rubber.Vinyl, rubber, plastic, metal, glass.Examples: Weather-strips, backlite and windshield moldings.-34° to 205° C(-30° to 400° F)