Refer to the Owner's Manual for emergency vehicle lifting procedures.When properly positioned, a floor jack can be used to lift a Jeep vehicle. Support the vehicle in the raised position with jack stands at the front and rear ends of the frame rails. Do not attempt to lift a Jeep vehicle with a floor jack positioned under:A body side sill.A steering linkage component.A drive shaft.The engine or transmission oil pan.The fuel tank.A front suspension arm.Transfer case.Use the correct sub-frame rail or frame rail lifting locations only.

Refer to the Owner's Manual for emergency vehicle lifting procedures.A vehicle can be lifted with:A single-post, frame-contact hoist.A twin-post, chassis hoist.A ramp-type, drive-on hoist.When a frame-contact type hoist is used, verify that the lifting pads are positioned properly. The hoisting and jack lifting points provided are for a complete vehicle. When a chassis or drivetrain component is removed from a vehicle, the center of gravity is altered making some hoisting conditions unstable. Properly support or secure vehicle to hoisting device when these conditions exist.