For a complete wiring diagram Refer to Section 8W.When Monitored:Continuously.Set Condition:A comparison between the tire circumference value contained in the EEPROM and the tire circumference value received on the CAN bus. Programmed value for tire size is not within acceptable range. Possible CausesINCORRECT VALUE PROGRAMMED INTO TIPM1. INCORRECT VALUE PROGRAMMED INTO TIPMTIRE SIZEBODY STYLEENGINE SIZESALES CODETIRE DIAMETERP225/75R 17 BSW ALL TERRAINJKALLTNA2480P225/70R 18 BSW ON/OFF ROADJKALLTNB, TT62480P225/75R 16 BSW ON/OFF ROADJKALLTRM2253LT225/75R 17 BSW OFF ROADJKALLTT72495P225/75R 17 OWL ON/OFF ROADJKALLTUF2480P245/75R 16 BSW ON/OFF ROADJKALLTYX, TYZ 2357Verify the correct Tire/wheel information is programmed in the TIPM.Is the correct value programmed in the TIPM according to the chart?YesTest complete.Perform ABS VERIFICATION TEST. (Refer to 5 - BRAKES - STANDARD PROCEDURE). NoProgram the correct Tire/Wheel information in the TIPM.Perform ABS VERIFICATION TEST. (Refer to 5 - BRAKES - STANDARD PROCEDURE).