The composite upper intake manifold thread bosses, if stripped out, can be repaired by utilizing a repair screw available through Mopar® parts. Repair screws are available for the following manifold attached components:MAP sensorPower steering reservoirEGR tubeThrottle cable bracketThe repair screws require a unique tightening torque specification from the original screw. Refer to the following chart for specification.DESCRIPTIONTORQUE*STRIP-OUT REPAIR SCREWS ONLYMAP Sensor Repair Screw4 N·m (35 in. lbs.)Power Steering Reservoir Repair Screw9 N·m (80 in. lbs.)EGR Tube Attaching Repair Screw9 N·m (80 in. lbs.)Throttle Cable Bracket Repair Screw9 N·m (80 in. lbs.)*Install Slowly Using Hand Tools Only