Attach canister to mounting bracket. Lock canister to mounting bracket by using lock tab (2).

Install two bolts (2) at front of canister mounting bracket (1).Install two bolts at rear of canister mounting bracket.

Connect electrical connector (4) to ESIM switch (2).Connect rubber hose (1) to ESIM switch.Connect fitting (3) to EVAP canister.Lower vehicle. The vapor/vacuum lines and hoses must be firmly connected. Also check the vapor/vacuum lines at the ESIM switch, filter and EVAP purge solenoid for damage or leaks. If a leak is present, a Diagnostic Trouble Code (DTC) may be set.