For a complete wiring diagram Refer to Section 8W.When Monitored:With the ignition on.Set Condition:The Instrument Cluster detects the Trip/Toggle Switch active for greater than 20 seconds.Possible CausesINSTRUMENT CLUSTER1. CHECK FOR AN ACTIVE DTCTurn the ignition on.With the scan tool, record and erase DTCs.Press the Trip/Toggle switch three times.With the scan tool, read DTCs.Does the scan tool display this DTC as active?YesReplace the Instrument Cluster in accordance with the service information.Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE) NoTest complete