<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="./twl_formatc.xsl"?>
<servinfo
releasenbr="1"
update="original"
id="b4787286796148adbc99c921bcf0fdae"
><title
>LAMP - DOMESTIC</title><figure
figtype="1-column-portrait-no-fig-id"
id="feac8270ba934e78b0f817bcd44082c0"
><graphic
graphicname="7a033c85"
></graphic></figure><s1
><ptxt
>Disconnect and isolate the battery negative cable.</ptxt></s1><s1
><ptxt
>Remove the grille panel from the front of the vehicle. <extxref
document="SOFTLINK"
extrefid="2328049370"
>(Refer to 23 - BODY/EXTERIOR/GRILLE - REMOVAL)</extxref>.</ptxt></s1><s1
><ptxt
>Remove the four screws (4) that secure the retainer (3) and the headlamp unit (2) to the mounting collar (1) on the face of the front end module carrier.</ptxt></s1><s1
><ptxt
>Pull the retainer and the headlamp unit away from the front of the vehicle far enough to access the wiring connection on the back of the lamp housing.</ptxt></s1><s1
><ptxt
>Disconnect the engine compartment wire harness connector from the headlamp bulb connector receptacle.</ptxt></s1><s1
><ptxt
>Remove the headlamp unit from the vehicle.<symbol
name="skip"
></symbol></ptxt></s1></servinfo>