Disconnect and isolate the battery negative cable.Remove both front wiper arms from the wiper pivots. (Refer to 8 - ELECTRICAL/WIPERS/WASHERS/WIPER ARM - REMOVAL - FRONT).Remove the cowl plenum cover/grille panel from over the front wiper module. (Refer to 23 - BODY/EXTERIOR/COWL GRILLE AND SCREEN - REMOVAL).Disconnect the wire harness connector (5) from the connector receptacle for the front wiper motor (3).Remove the two screws (2) that secure the ends of the front wiper module (4) bracket to the cowl plenum.Pull the front wiper module upward to disengage the knob-like rubber isolator from the slot in the forward wall of the cowl plenum.Remove the front wiper module from the cowl plenum as a unit.