For a complete wiring diagram Refer to Section 8W.When Monitored:With the ignition on.Set Condition:A PCM from another vehicle has been installed in the vehicle.Possible CausesPCM FROM ANOTHER VEHICLE INSTALLED1. PCM FROM ANOTHER VEHICLE INSTALLEDThis DTC is set when a PCM from another vehicle is installed into the current vehicle.Has another PCM been installed?YesReplace the PCM in accordance with the service information.Perform BODY VERIFICATION TEST VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE) NoGo To 22. OTHER CAN-C MODULES SET VIN MISMATCHIs VIN Mismatch DTC set in other CAN-C modules?YesReplace the PCM in accordance with the service information.Perform BODY VERIFICATION TEST VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE) NoReplace the TIPM in accordance with the service information.Perform BODY VERIFICATION TEST VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)