For a complete wiring diagram Refer to Section 8W.When Monitored:ContinuouslySet Condition:The TIPM is not configured for the vehicle.Possible CausesTIPM1. CHECK FOR ACTIVE DTCTurn the ignition on.With the scan tool, read DTCs.Does the scan tool display this DTC as active?YesGo To 2NoTest complete.2. ACTIVE TIPM DTCCycle the ignition from off to run remaining in run.With the scan tool, read DTCs.Does the scan tool display this DTC as active?YesGo To 3NoTest complete.3. VIN MISMATCH DTC PRESENTTurn the ignition on.With the scan tool, read DTCs.Is DTC: B2206-CURRENT VIN MISSING / MISMATCH also active?YesRefer to repair procedure for DTC-B2206-CURRENT VIN MISSING / MISMATCH.(Refer to 8 - ELECTRICAL/IGNITION CONTROL - DIAGNOSIS AND TESTING)NoReplace the TIPM in accordance with the service information.Perform BODY VERIFICATION TEST VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)