<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="./twl_formatc.xsl"?>
<servinfo
releasenbr="1"
update="original"
id="jc6e36f0af044f32b4af18693f94f526"
><title
>REMOVAL</title><s1
><ptxt
>Remove the hard tops, if equipped, <extxref
document="SOFTLINK"
extrefid="2343013370"
>(Refer to 23 - BODY/REMOVABLE TOP/TOP - REMOVAL)</extxref>.</ptxt></s1><s1
><ptxt
>Remove the sport bar speaker pod, <extxref
document="SOFTLINK"
extrefid="2337287370"
>(Refer to 23 - BODY/INTERIOR/SPORT BAR - SPEAKER POD - REMOVAL)</extxref>.</ptxt></s1><figure
figtype="1-column-portrait-no-fig-id"
id="k4666fa842644d9086bb69f69d1afaf8"
><graphic
graphicname="7a033d60"
></graphic></figure><para
><ptxt
>On four door vehicles;</ptxt></para><s1
><ptxt
>Remove the seat belt retractor (4) and turning loop (2) as necessary, <extxref
document="SOFTLINK"
extrefid="0882010370"
>(Refer to 8 - ELECTRICAL/RESTRAINTS/SEAT BELT &amp; RETRACTOR
- REMOVAL)</extxref>.<symbol
name="skip"
></symbol></ptxt></s1><figure
figtype="1-column-portrait-no-fig-id"
id="mdda5f72d7a643b4af5983ea88d428f3"
><graphic
graphicname="7a035fc3"
></graphic></figure><para
><ptxt
>On four door vehicles;</ptxt></para><s1
><ptxt
>If equipped, separate the rear dome light (6) from the sport bar cross bar and disconnect the electrical connector (4).<symbol
name="skip"
></symbol></ptxt></s1><figure
figtype="1-column-portrait-no-fig-id"
id="b9d2a2b0e6ad44269df7d227d55ad1c4"
><graphic
graphicname="7a035fc4"
></graphic></figure><para
><ptxt
>On four door vehicles;</ptxt></para><s1
><ptxt
>Unzip the cover (2) and remove.<symbol
name="skip"
></symbol></ptxt></s1><figure
figtype="2-column-portrait-no-fig-id"
id="d7b471f385ca469398c73dd37dd7678b"
><graphic
graphicname="7a035fc5"
></graphic></figure><para
><ptxt
>On four door vehicles;</ptxt></para><s1
><ptxt
>Using a trim stick C-4829 or equivalent, separate the push pin fasteners and remove the interior lamp bezel (5).</ptxt></s1><s1
><ptxt
>Remove the cross bar trim (6) and (4).</ptxt></s1><s1
><ptxt
>Remove the side trim (2) and (8).<symbol
name="skip"
></symbol></ptxt></s1><figure
figtype="1-column-portrait-no-fig-id"
id="l842e84238634625a3b2173737afde22"
><graphic
graphicname="7a035fc6"
></graphic></figure><para
><ptxt
>On two door vehicles;</ptxt></para><s1
><ptxt
>Unzip the cover (1) and separate the trim (2).<symbol
name="skip"
></symbol></ptxt></s1><figure
figtype="1-column-portrait-no-fig-id"
id="m17e9ba986a24477bc33b8ae19f63296"
><graphic
graphicname="7a035fc7"
></graphic></figure><para
><ptxt
>On two door vehicles;</ptxt></para><s1
><ptxt
>Unzip the cover (1) and separate the trim (2).<symbol
name="skip"
></symbol></ptxt></s1><figure
figtype="1-column-portrait-no-fig-id"
id="k18b9041b258471dadf8f7c242d59c98"
><graphic
graphicname="7a035fc8"
></graphic></figure><para
><ptxt
>On two door vehicles;</ptxt></para><s1
><ptxt
>Separate the trim (1) and (3).<symbol
name="skip"
></symbol></ptxt></s1><figure
figtype="1-column-portrait-no-fig-id"
id="h5bac0ae7add42d5a6ea1a6f0351672b"
><graphic
graphicname="7a035fc9"
></graphic></figure><s1
><ptxt
>Unzip the side bar covers.<symbol
name="skip"
></symbol></ptxt></s1><figure
figtype="1-column-portrait-no-fig-id"
id="i866beb9062242b5bcb2b4eacd0b4a80"
><graphic
graphicname="7a035fca"
></graphic></figure><s1
><ptxt
>Using a trim stick C-4829 or equivalent, separate the push pin fasteners (2) and (4) and remove the trim (1) and (3).<symbol
name="skip"
></symbol></ptxt></s1></servinfo>