Position the seat assembly into the vehicle and lock the rear of the front latches (3) into rear loop of the lower brackets (4).Lift the seat upright and lock the front of the front latches (3) into the front loop of the lower brackets (4).Position the seat assembly down and secure the rear latches (2).Lift the seat back (1) into the upright position to lock the rear latches (2).

Position the seat assembly into the vehicle and over the rear studs.Install the nuts (2) and tighten to 85 N·m (63 ft. lbs.).Install the bolt (3) and tighten to 61 N·m (45 ft. lbs.).

Install the rear bracket front screws (2) and tighten to 61 N·m (45 ft. lbs.).Install the front bracket screws (1) and tighten to 61 N·m (45 ft. lbs.).Install the center belt buckle (4) and make sure the tab is lined up with the slot in the plate.Install the buckle bolt and tighten to 61 N·m (45 ft. lbs.).