Install the hub bearing to the knuckle.Install the hub bearing to knuckle and the 3 bolts (3) then tighten to 102 N·m (75 ft. lbs.).Install the axle nut if equipped. Tighten to 136 N·m (100 ft. lbs.).

Install the wheel speed sensor (1) through the hole in the brake shield (2)(Refer to 5 - BRAKES/ELECTRICAL/FRONT WHEEL SPEED SENSOR - INSTALLATION).

Install the wheel speed sensor (1) into the hub & bearing and install the mounting bolt (2). Tighten to 4-6 N·m (34-50 in. lbs.).

Install the brake rotor (3) (Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/ROTORS - INSTALLATION).Install the brake caliper adaptor (1) (Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/DISC BRAKE CALIPER ADAPTER - INSTALLATION).Install the caliper (1) (Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/DISC BRAKE CALIPERS - INSTALLATION).Install the wheel and tire assembly (Refer to 22 - TIRES/WHEELS - STANDARD PROCEDURE).Remove the support and lower the vehicle.