ComponentFluid, Lubricant, or Genuine PartEngine CoolantMopar_® Antifreeze/Coolant 5 Year/100,000 Mile (160 000 km) Formula HOAT (Hybrid Organic Additive Technology)Engine OilAPI Certified SAE 5W-20 Engine Oil is recommended.Meets the requirements of DaimlerChrysler Material Standard MS-6395.Spark PlugsRefer to the Vehicle Emission Control Information label in the engine compartment.Oil Filter (3.8L Engine)Mopar_® Oil Filter (P/N 04105409AC)Fuel Selection87 OctaneComponentFluid, Lubricant, or Genuine PartEngine CoolantMopar_® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology)Engine Oil - Gasoline (Non ACEA Categories)For best performance and maximum protection under all types of operating conditions, the manufacture only recommends engine oils that are API certified and meet the requirements of DaimlerChrysler Material Standard MS-6395. Use Mopar or an equivalent oil meeting the specification MS-6395. These Certified Oils exhibit the American Petroleum Institute (API) Engine Oil Certification Symbol on the front of the oil container. This symbol means that the oil has been tested, certified, and licensed by the American Petroleum Institute (API) to meet the oil standards required by the manufacturers. The manufacturer only recommends API Certified engine oils that meet the requirements of DaimlerChrysler Material Standard MS-6395.Engine Oil - Gasoline (ACEA Categories)For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils that meet the requirements of ACEA A3/B3, A3/B4 or A5/B5.Engine Oil - Diesel (without Particulate Filter)Use only Diesel Engine Oils confirming to API (American Petroleum Institute) Quality CI-4 or CJ-4. For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils that meet the requirements of ACEA A3/B4/C3.Engine Oil - Diesel (with Particulate Filter)Use only Diesel Engine Oils confirming to API (American Petroleum Institute) Quality CI-4 or CJ-4. For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils that meet the requirements of ACEA A3/B4/C3. (LOW ASH)Spark PlugsRefer to the Vehicle Emission Control Information label in the engine compartment.Oil Filter (3.8L Engine)Mopar_® Oil Filter (P/N 04105409AC)Oil Filter (2.8L Diesel Engine)Mopar_® Oil Filter (P/N 5003558AA)Fuel Selection (Gasoline Engines)91 OctaneFuel Selection (Diesel Engines)50 Cetane (Less than 15 ppm Sulfur)ComponentFluid, Lubricant, or Genuine PartAutomatic TransmissionMopar_® ATF+4 Automatic Transmission FluidManual TransmissionMopar_® Manual Transmission Lubricant or equivalent (meeting the requirements of DaimlerChrysler Material Standard MS-9224)Transfer CaseMopar_® ATF+4 Automatic Transmission Fluid or equivalent.Axle Differential (Front)Mopar_® Gear & Axle Lubricant (SAE 80W-90) (API GL-5) or equivalent.Axle Differential (Rear)198 RBI (Model 35) and 226 RBI (Model 44) - Mopar_® Gear & Axle Lubricant (SAE 80W-90) (API GL-5) or equivalent. For trailer towing, use Mopar_® Synthetic Gear & Axle Lubricant (SAE 75W-140) or equivalent. Models equipped with Trac-Lok require an additive.Brake Master CylinderMopar® DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.Power Steering ReservoirMopar_® ATF+4 Automatic Transmission FluidComponentFluid, Lubricant, or Genuine PartAutomatic TransmissionMopar_® ATF+4 Automatic Transmission FluidManual TransmissionMopar_® Manual Transmission Lubricant or equivalent (meeting the requirements of DaimlerChrysler Material Standard MS-9224)Transfer CaseMopar_® ATF+4 Automatic Transmission Fluid or equivalent.Axle Differential (Front)Mopar_® Gear & Axle Lubricant (SAE 80W-90) (API GL-5) or equivalent.Axle Differential (Rear)198 RBI (Model 35) and 226 RBI (Model 44) - Mopar_® Gear & Axle Lubricant (SAE 80W-90) (API GL-5) or equivalent. For trailer towing, use Mopar_® Synthetic Gear & Axle Lubricant (SAE 75W-140) or equivalent. Models equipped with Trac-Lok require an additive.Brake Master CylinderMopar_® DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.Power Steering ReservoirMopar_® ATF+4 Automatic Transmission FluidU.S.MetricFuel (Approximate) — 2 Door Models18.5 Gallons70 LitersFuel (Approximate) — 4 Door Models21.5 Gallons79 LitersEngine Oil with Filter3.8 Liter Engine (SAE 5W-20, API Certified Engine Oil)6 Quarts5.7 LitersCooling System *3.8 Liter Engine (Mopar_® Antifreeze/Engine Coolant 5 Year/100,000 Mile (160 000 km) Formula)13 Quarts12 Liters* Includes heater and coolant recovery bottle filled to MAX level.U.S.MetricFuel (Approximate) — 2 Door Models18.5 Gallons70 LitersFuel (Approximate) — 4 Door Models21.5 Gallons79 LitersEngine Oil with Filter3.8 Liter Engine (SAE 5W-20, API Certified Engine Oil)6 Quarts5.7 Liters2.8 Liter Diesel Engine7 Quarts6.6 LitersCooling System *3.8 Liter Engine (Mopar_® Antifreeze/Engine Coolant 5 Year/100,000 Mile (160 000 km) Formula)13 Quarts12 Liters2.8 Liter Diesel Engine (Mopar® Antifreeze/Engine Coolant 5 Year/100,000 Mile Formula)13 Quarts12 Liters* Includes heater and coolant recovery bottle filled to MAX level.