B2209-OCCUPANT RESTRAINT CONTROLLER INTERNAL 3- When Monitored:With the ignition on. The module's on board diagnostics continuously performs internal circuit tests.
- Set Condition:This DTC will set if the module identifies an out of range internal circuit.
Possible Causes
OCCUPANT RESTRAINT CONTROLLER (ORC)
Diagnostic Test1. REPLACE OCCUPANT RESTRAINT CONTROLLERTurn the ignition on.To avoid serious or fatal injury, turn the ignition off, disconnect the battery and wait two minutes before proceeding.If the Occupant Restraint Controller is dropped at any time, it must be replaced. Failure to take proper precautions could result in accidental airbag deployment
and serious or fatal injury.Repair- Replace the ORC in accordance with the Service Information.
- Perform *AIRBAG SYSTEM VERIFICATION TEST - VER 1.