An intrusion sensor is installed within the center floor console only on four-door vehicles equipped with the export premium version of the Vehicle Theft Alarm (VTA).Disconnect and isolate the battery negative cable.Remove the center console from the vehicle. (Refer to 23 - BODY/INTERIOR/CENTER CONSOLE - REMOVAL).Place the center console on a suitable work surface. Be certain to take the proper precautions to protect the console from receiving cosmetic damage during the service procedure.Remove the screws at each rear side of the console that secure the rear trim cover to the console.Remove the rear trim cover from the console.Remove the fasteners securing the intrusion sensor to the rear outer surface of the center console bin.Remove the intrusion sensor from the center console bin.